Description
APPLICATIONS
Recommended for re-fill or top-up of brake and clutch systems in passenger cars, 4WD’s, motorcycles, light and heavy duty commercial vehicles, mining, construction and agricultural equipment that require a non-petroleum based brake & clutch hydraulic fluid.
Recommended for re-fill or top-up of brake and clutch systems in passenger cars, 4WD’s, motorcycles, light and heavy duty commercial vehicles, mining, construction and agricultural equipment that require a non-petroleum based brake & clutch hydraulic fluid.
OZONE FRENO Brake Fluid DOT 4 is suitable for use where the vehicle manufacturer specifies DOT 3 or DOT 4 brake fluid. Better performance for life of fluid compared to DOT 3 fluids.
NOTE: Intermixing of brake fluids of different grades is not recommended. Intermixing may impact braking performance of some brake systems. This product is not miscible with silicone based brake fluids. This product is not compatible with any mineral or synthetic oil based fluids.
Product Benefits
- Excellent braking response due to high boiling point of fluid.
- High wet boiling point ensures long term retention of fluid performance.
- Better performance for life of fluid.
- Compatible with all common brake system materials
- Borate esters to scavange water and maintain ERBP as the fluid ages.
- Anti-corrosion properties: complete brake system protection.
- Elastomer compatibility: no leakage or fluid losses.
Recommendations / Specifications
FMVSS, No. 116, DOT 4 and DOT 3, SAE J1703/J1704, ISO 4925 Class 4&3.
Meets the quality requirements of European Manufacturers
TYPICAL TECHNICAL PROPERTIES
| DOT 4 | |
|---|---|
| Product code | 12521ASP |
| Density at 20°C, g/MI, ASTM D4052 | 1.040 |
| Kinematic Viscosity at -40°C, mm2/s, ASTM D445 | 1200 |
| Kinematic Viscosity at 100°C, mm2/s, ASTM D445 | 2.6 |
| Dry ERBP (FMVSS No. 116) S.11, °C (min.) | 263 |
| Wet ERBP (FMVSS No. 116) S.12, °C (min.) | 165 |
| pH (FMVSS No. 116) S.14 | 8.5 |
| Boron | 1.30 mass% |
| Corrosion Test @ 100°C for 120hrs | pass test |
Note: These characteristics are typical of current production. While future production will conform to Ozone’s specification, variations in these
STORAGE STABILITY
Storage time is up to three years in sealed, metal, bulk containers. Protection should be provided to prevent any moisture contamination. Moisture contamination will result in a 5-10°C boiling point drop for each 0.1% of water absorbed.
Storage time is up to three years in sealed, metal, bulk containers. Protection should be provided to prevent any moisture contamination. Moisture contamination will result in a 5-10°C boiling point drop for each 0.1% of water absorbed.
Health and Safety: Avoid contact with skin, varnish & paint. If skin contact occurs, wash with water.
