Description
APPLICATIONS
OZONE ATF T IV was developed for use in automatic transmission, especially for Toyota and Aisin AW. OZONE ATF T IV Fluid can replace T, T-II and T-III Fluids.
It is advisable to flush with OZONE ATF T IV Fluid before filling with OZONE ATF T IV Fluid.
PRODUCT BENEFITS
- Guarantees maximum wear protection in all operating conditions.
- Excellent smooth shift action.
- High, stable viscosity index.
- Very good lubricating properties also at low temperatures in winter.
- Protection against wear, corrosion and foaming Neutral behavior by inhibition to non-ferrous metals.
- Excellent friction and anti-shudder performances.
- Excellent viscosity stability in operation.
- Very low pour point.
- Excellent oxidation stability.
- Excellent durability thanks to its high quality base oils and additives.
- Neutral behavior towards sealing materials.
- Long fluid life based on excellent oxidation resistance.
- Compatibility with synthetic rubber seal materials.
- Resistance to foaming.
RECOMMENDATIONS / SPECIFICATIONS
Fulfils the requirements for automatic transmission of Toyota and Aisin AW, Aisin Warner Automatic Gearbox, BMW 83 22 7 542 290 for MINI 6-Speed Aisin F21, 83 22 0 402 413 für MINI 6-Speed, Aisin F21 (nur USA), FORD 1327936, WSS-M2C924-A, XT-8QAW, General Motors 9986195, OPEL/GM 1940771, 1940774, Land Rover Fat2748 6-Speed Aisin F21, RENAULT 7711218368 SU1 Gear, 7711172225 für Getriebe SUO und SU1, TOYOTA JWS 3309, 08886-91016/00279-000T4, 08886-01705, VOLVO 1161540, VW/AUDI G 055 025 A2, NISSAN 999MP-MTKOOP für RE5F22A (Aisin AW55 50SN Nissan Altima, Maxima, Quest, Sentra), Matic K, Mazda K020- W0-049, b 99000-22800-001, ESSO JWS3317, Land Rover LR022460, Fiat 9.55550-AV1
TYPICAL TECHNICAL PROPERTIES
| Product code | 12715AT |
|---|---|
| Color, VISUAL | RED |
| Density at 15°C, g/ml, ASTM D4052 | 0.8520 |
| Kinematic Viscosity at 40°C, mm2/s, ASTM D445 | 35.25 |
| Kinematic Viscosity at 100°C, mm2/s, ASTM D445 | 7.1 |
| Viscosity Index, ASTM D2270 | 170 |
| Flash Point(COC), °C, ASTM D92 | 208 |
| Pour Point, °C, ASTM D97 | -42 |
| Brookfield viscosity at -40°C, mPa.s, ASTM D2983 | 18000 |
*DEXRON® is a registered trademark of General Motors Corporation.
Note: These characteristics are typical of current production. While future production will conform to Ozone’s specification, variations in these characteristics may Occur.
