Description
APPLICATIONS
OZONE SYNTHETIC MULTI-VEHICLE CVT FLUID is formulated by carefully balancing base oils and advanced additives, to meet the requirements of both European and Japanese CVT manufacturers. This product may not be used in some hybrid vehicles, requiring special fluids.
PROPERTIES
OZONE SYNTHETIC MULTI-VEHICLE CVT FLUID provides outstanding metal-to-metal frictional properties and excellent protection and performance for CVTs throughout vehicle manufacturer-recommended drain intervals. It is Warranty Secure and will not void your vehicle’s warranty. OZONE FULLY SYNTHETIC MULTI-VEHICLE CVT FLUID is a cost-effective, high-performance alternative to original equipment manufacturer (OEM) fluids.
PRODUCT BENEFITS
- Excellent Frictional Properties.
- Outstanding Wear Protection.
- Resists Heat.
- Superior Wet-Clutch Performance.
- Help prevent belt and chain slipping and help extend transmission life.
- Effectively resists wear to the transmission’s vital parts, helping achieve long life.
- Superior wet-clutch performance for outstanding anti-shudder durability.
- Excellent thermal and oxidation stability.
- Extended oil life.
RECOMMENDATIONS / SPECIFICATIONS
AUDI TL 52180, DAIHATSU AMIX CVTF DFE, CVTF-DC, FORD WSS-M2C928-A, CVT23, CVT30, MERCON C,
GM SATURN DEX-CVT, HONDA HCF -2, HMMF, HYUNDAI SP -CVT1, SP-III, KIA SP-III, MB 236.20, MINI EZL799A, MITSUBISHI CVTF -J1/SP-III, CVTF J-4, NISSAN NS-1/NS-2/NS-3, SUBARU CVT, Lineartronic CVTF, i-CVT, SUZUKI CVTF GREEN 2, TC/NS -2/CVT Green 1, TOYOTA TC, CVT FE, VW G 052 180, G 052 516, BMW 8322 0135 376, 8322 0 429 154, DODGE/JEEP NS-2, CVTF+4®, MOPAR® CVT 4, ZF CVT V1.
Meets or exceeds the quality requirements of most American, Jamese and European manufacturers.
TYPICAL TECHNICAL PROPERTIES
| Product code | 12710AT |
|---|---|
| Color, VISUAL | RED |
| Density at 15°C, g/ml, ASTM D4052 | 0.852 |
| Kinematic Viscosity at 40°C, mm2/s, ASTM D445 | 36.95 |
| Kinematic Viscosity at 100°C, mm2/s, ASTM D445 | 7.35 |
| Viscosity Index, ASTM D2270 | 170 |
| Flash Point(COC), °C, ASTM D92 | 212 |
| Pour Point, °C, ASTM D97 | -42 |
| Brookfield viscosity at -40°C, mPa.s, ASTM D2983 | 16000 |
Note: These characteristics are typical of current production. While future production will conform to Ozone’s specification, variations in these characteristics may Occur.
